2 floor mechanical car parking lift

Model Number: Hydro-park1123 1 Brand Name: Mutrade Key Specifications/Special Features: Hydro-park 1123 is the new two post parking lift. It’s a kind of valetparking equipment, suitable for both commercial and residentialparking purposes. It moves only vertically, so the users have toclear the ground level to get the higher level car down. It ishydraulic driven with chains. The equipment can be used for bothsedan & small SUV.- Commercial grade design- Galvanized and corrugated platform guarantee safety and longlifetime- Anti-slip corrugated deck protect both vehicle and driver from
possible slip and damage but still high-heel shoe friendly
- Single hydraulic lifting cylinders with chains as driven system
- The pole with piston is chroming to anti-corrode to ensure its long
using life
- Individual hydraulic power pack and control panel
- Self-standing and self-support structure
- Symmetrical designed column
- Can be relocated
- Special designed control arm for operator to control the lift
without getting under the platform
- Synchronization chain assuring the lifting platform balance
- 2300kg capacity for most types of vehicles
- Middle post sharing feature save cost and space
Electric key switch for security and safety
A new “LOCK DOWN” button for platform sitting on locking tab to
protect cylinder
- Automatic shut-off if operator releases the key switch
- Dynamic mechanical locks as anti-falling device hold the platform
in place
- Manual lock release available in case electricity failure
- Platform can be stopped at different heights to t for various
vehicles and ceiling heights
- Hydraulic overloading protection

Safety feature:
Limit switch
To stop the power pack pumping, when the platform reach the position, height adjustable feature
Power unit
1.Pressure relief valve(will be activated when the pressure inside of the cylinder reach a certain level)
2.Directional valve
3.Solenoid valve
4.Flow control valve
5.Transparent oil tank(Be able to see the oil level)
Hot galvanized cover plate
Anti-rust non-slip design leakage-proof design
Electric box
1. 24V control
2.Voltage overload protect
3.Fuse
Mechanical lock hook
Lock the platform in the lock hole when, during the platform go up and down
Full range mechanical lock block
1. Full range mechanical lock block start from 500mm of the bottom of the post until reach the lifting position
2. Each block is 70mm high and 80mm gap in between.
3. It will be activated when there is any failure of the hydraulic system, and hold the platform on the
next locking position by the post.
Control box
1. Self-restore key switch.
2. Emergency stop button